Skip to content

Check an STL before printing. Size, volume, weight, closed or not

Drop the file and your browser measures it. Then a person checks what no file check can see, before any price.

Read in your browser. Nothing is uploaded until you send it to us.

How it reads the file

Four numbers, and how each is made

  • Units

    An STL stores numbers, not units. Longest side 10 or more reads as mm, under 0.4 as metres, the way Blender writes them; in between we ask.

  • Closed solid

    Every edge of a closed solid joins two faces, running opposite ways. We count holes, fins, flipped faces and separate bodies.

  • Size

    The box around the part against 340 x 320 x 340 mm.

  • Weight

    Volume from one tetrahedron per face, exact for a closed mesh, times the datasheet density, solid.

What a file check cannot see

  • Walls under about 0.8 mm and holes smaller than the nozzle.
  • Fits: we hold ±0.5% of the size, never tighter than ±0.5 mm.
  • Which way the layers run under load.
  • Overhangs, and where support marks land.
  • Whether the shape is the part you meant.

Questions

How do I calculate the volume of an STL file?

Add the signed volume of the tetrahedron each triangle makes with the origin. For a closed mesh the total is the volume.

Why does my STL show the wrong size?

The file has no unit. Drawn in cm it reads ten times too small as mm, in inches 25.4 times. Pick the unit and tell us.

What does "not a closed solid" mean?

Holes, fins or flipped faces: no clear inside, so a slicer may print it wrong. We say what needs fixing.

Is my file uploaded?

No. It reaches us only if you take it on to the quote form.

A checked file, then the part

A person reads it and replies with a price, in 3 hours on average on workdays.