Skip to content

Clear 3D printing: what FDM gives, and where to go instead

A printed part can let light through, but it will not be glass-clear: the part is built from extruded lines, its surface shows the layers, and light scatters on both, so what comes off the printer is translucent. For a light cover, an LED diffuser or a housing a status light must show through, we print plain PC, which Bambu Lab sells in a colour called Transparent, ordered in for the job, or a translucent filament on request. For a lens or a window that must look like moulded acrylic, FDM is the wrong process, and this page says where to go. Posted to the Baltics, Finland, Sweden and Denmark.

  • Translucent as printed: light passes, the layers show
  • Plain PC, Bambu Lab's Transparent colour, ordered in for the job
  • PETG HF: 8 colours in Bambu Lab's list, none of them clear
  • Up to 340 x 320 x 340 mm in one piece in PC

Can a 3D printed part be clear?

Translucent, yes. Clear, no. A printed part spreads light into a glow, not a sharp image. That suits a light cover, an LED diffuser, a fill-level window or a housing with a status light, and for those we print plain PC in Bambu Lab's Transparent colour, ordered in, or a translucent filament on request.

A lens, a sight glass or a cover that must look like moulded acrylic needs sheet, resin or moulding, which we do not run.

What a printed part does with light

FDM lays down a plastic line next to a plastic line, layer on layer. Light that enters a part meets the joins between those lines, scatters, and leaves as a glow. Prusa Research, printing lenses as an experiment, put it plainly: "most of the printed objects will be translucent". They got closer to clear with solid, slow prints and then sanding and polishing. We supply the part as it comes off the printer, so the translucent result is the one we promise.

Good for: a cover over an LED strip or a status light, a diffuser in a lamp or a sign, a fill-level window in a housing where you need to see whether there is liquid behind it. Wrong for: a lens, a window to read a gauge or a scale through, a display cover, a cover that must look like glass or moulded acrylic, anything a camera looks through.

Which filaments come in a clear colour

We read the colour list Bambu Lab gives for each of the 22 grades in our files. Plain PC is the only one with a transparent colour, and its datasheet calls it "a naturally transparent thermoplastic". Outside those 22, Bambu Lab also sells PLA Translucent and PETG Translucent as separate products with their own datasheets, which are not in our files, so we quote no figure for them; we can order them in, and the quote names what it priced.

Colours Bambu Lab listsClear or translucent colourOur status
PCColours Bambu Lab listsTransparent, Clear Black, Black, WhiteClear or translucent colourYes: TransparentOur statusordered in
PETG HFColours Bambu Lab lists8: Yellow, Orange, Green, Red, Black, White, Blue, GrayClear or translucent colourNoOur statusmost popular
PLA BasicColours Bambu Lab lists19, Jade White to BlackClear or translucent colourNoOur statusmost popular
The other 19 gradesColours Bambu Lab listsnone named transparent, clear or translucentClear or translucent colourNoOur status

Two things follow. PETG HF, the PETG we print most, has no clear colour, so "clear PETG" from us means PETG Translucent ordered in, not PETG HF. And no Bambu Lab datasheet we hold gives light transmission, haze or a refractive index for any grade, so nobody can promise from a datasheet how much light a printed part will pass. We say translucent and describe the part; we do not quote a percentage.

Plain PC, the grade sold in Transparent

Two black PC FR battery boxes holding cylindrical cells, on a cutting mat

Plain PC is a polycarbonate without the flame retardant of PC FR, which is on our most popular list. It is ordered in for the job. The figures are Bambu Lab's datasheet values for printed specimens, annealed and dried at 80 °C for 12 hours before testing; X-Y is along the layers, Z across them.

PC
Our statusordered in; the quote gives the time
Heat deflection, 1.8 MPa (ISO 75)117 °C
Tensile strength, X-Y / Z (ISO 527)55 / 34 MPa
Bending modulus, X-Y / Z (ISO 178)2,310 / 1,620 MPa
Impact strength, X-Y / Z, unnotched (ISO 179)34.8 / 9.0 kJ/m²
Saturated water absorption, 25 °C, 55% RH0.25%
Acid / alkali"Not resistant" / "Not resistant"
Flammability row"Flammable"
Largest part in one piece340 x 320 x 340 mm

Read the heat row as a test on a loaded bar, not a working temperature; tell us the temperature the cover sees and a person checks. The datasheet reads "Not resistant" to acid and alkali and "Not resistant to some organic solvents", and it says nothing about UV, so an outdoor lamp cover gets no UV promise from us; the datasheet-by-datasheet picture is on UV resistant filament. PC prints in a heated chamber, so the largest part in one piece is 340 x 320 x 340 mm. If the part also needs flame retardance, PC FR is the grade, and it comes in Black, White and Grey only.

From our enquiries

In about 100 enquiry threads we read, transparency was negotiated in 5. Colour is the most asked preference in those threads, and a wish for transparency arrives as free text. A 2024 enquiry for a custom container went through rounds on diameter, height, quantity and transparency. Transparent resin came up among the resin requests; we print FDM only.

The lesson for your request: say what the light has to do in the first message.

What to say in the request

  1. What the light must doPass and spread (a diffuser), show a level (a window on a tank), show a light (a status LED behind a wall), or be read through (a gauge, a scale). The first three are printing jobs. The fourth is not, and we say so.
  2. Heat, load and chemicalsThe translucent options are few, so the usual trade-offs still apply. A cover near a hot lamp, a window on a tank of cleaning fluid, a guard that gets knocked: name it, and a person checks PC's rows against it.
  3. Colour elsewhere on the partThe grades we print most are black, white or grey. If the housing is opaque and only a window must pass light, say so: a printed housing with a sheet window may be the better part, and the window is yours to fit.
  4. The fileSTEP or STL, with the wall thickness as drawn. A thinner wall passes more light; a person says what to expect before the price.

When you need it clear

  1. A flat windowCut from acrylic or polycarbonate sheet and seated in a printed frame or housing. We print the frame with the pocket for the sheet; you buy, cut and fit the window. We do not supply, cut or glue the sheet.
  2. A small detailed clear partA resin print, which we do not run. Even a resin part needs finishing to be fully clear, such as sanding and a clear coat. Take the file to a resin bureau and ask for that finishing.
  3. VolumeInjection moulding in a clear polymer. We run no moulding and name no moulder; we can print the first housings while the tool is being made.
  4. What we do not doNo sanding, polishing, clear coat, vapour smoothing, painting or gluing. We supply the part as it comes off the printer, and we do not promise a clear part.

Questions

Checked by the druckworks workshopUpdated

Can you 3D print clear plastic?

Translucent, not clear. Plain PC, which Bambu Lab sells in a colour called Transparent, ordered in for the job, or a translucent filament on request. The part passes light and shows its layers; it will not look like glass.

Is PETG transparent?

Bambu Lab lists 8 colours for PETG HF, the PETG we print most, and none is clear. Bambu Lab sells PETG Translucent as a separate product with its own datasheet, which we do not hold; we can order it in, and the quote names it.

Can you print a lens?

No. A printed part scatters light and shows its layers, and we do not polish, so a lens is not something FDM gives you.

Can you sand, polish or clear-coat the part?

No. We supply the part as it comes off the printer: no sanding, polishing, coating, painting or gluing.

Can you print clear polycarbonate?

Plain PC in Bambu Lab's Transparent colour, ordered in, up to 340 x 320 x 340 mm in one piece, translucent as printed. PC FR, on our most popular list, comes in Black, White and Grey only.

Do you post to Sweden?

Yes. We post to Latvia, Estonia, Lithuania, Finland, Sweden and Denmark. The quote names the carrier and the shipping price.

Send the file and say what the light must do

Send the STEP or STL and write whether the part should spread light, show a level or show a light. A person says what to expect, names plain PC or a translucent filament, and replies with a price in 3 hours on average on workdays.