Your STL is the wrong size Units, export scale, and a check before you send
An STL stores numbers, not units. PrusaSlicer, Bambu Studio and OrcaSlicer read them as millimetres, so a part drawn in centimetres loads 10 times too small, in inches 25.4 times, in metres 1,000 times. Know one real dimension, drop the file in our STL check and compare the number it shows. If it is off by one of those factors, the fix is an export setting, not a redesign. Below: where Fusion, SolidWorks, Onshape, FreeCAD, Blender, SketchUp, Tinkercad and OpenSCAD set the unit, and what the three slicers do with a file that is off.
- 10 times too small: drawn in centimetres
- 25.4 times too small: drawn in inches
- 1,000 times too small: drawn in metres
- Our STL check shows the size in mm before you send
Why is my STL the wrong size?

An STL stores no unit, so the program that opens it decides what the numbers mean. PrusaSlicer, Bambu Studio, OrcaSlicer and our quote form read millimetres. The factor tells you the unit the part was drawn in: 10 times too small, centimetres; 25.4 times, inches; 1,000 times, metres.
Fix it in the export dialog of the program that made the file, or name the unit in the part description. STEP and 3MF carry their unit.
Check it before you send
A binary STL is an 80-character header, a triangle count and 50 bytes per triangle: twelve numbers for the normal and the three corners, then a 2-byte attribute count. There is no field for a unit.
The method is one known dimension. Know how long the part should be, drop the file in our STL check and compare. The check reads the file in your browser, up to 25 MB; nothing is uploaded until you send it to us. It shows the size in mm, the volume in cm³, the solid weight in PETG HF, the triangle count, whether the mesh is one closed solid, and whether the part fits in one piece.
Take a part meant to be 120 mm long. The check reads a longest side of 10 or more as mm and one under 0.4 as metres; in between, it asks. Exported in metres, the file says 0.12: the check reads it as metres and shows 120 mm. Exported in inches, the file says 4.72: the check asks which unit the part was drawn in and offers 120 mm as inches. Exported in centimetres, the file says 12: the check shows 12 mm and says nothing, because a part drawn in centimetres looks exactly like a small part drawn in millimetres. Only the person who drew it knows it should be 120. That is why the known dimension matters more than any automatic guess, ours included.
Pick the unit under Drawn in and the size, volume and weight are rescaled. Send it to us opens the quote form with the file attached. The form reads STL as mm, so if the unit is not mm, write "drawn in centimetres" or "drawn in inches" in the part description. A person checks the size before any price.
Where these programs set the unit
Eight programs, checked against their own help pages in October 2026, Tinkercad's only in part. Where the help names no default, we say so; check the setting every time rather than trust it.
| Program | Where the unit is set | What to set |
|---|---|---|
| Fusion | Where the unit is setRight-click the body or component, Save As Mesh, format STL, then Unit Type | What to setMillimeter. The help lists Centimeter, Millimeter, Meter, Inch and Foot and names no default. Fusion keeps lengths in centimetres internally. |
| SolidWorks | Where the unit is setFile > Save As (File > Export As when installed from the 3DEXPERIENCE platform), Save as type STL, Options | What to setUnit: millimeters. The help names no default. |
| Onshape | Where the unit is setRight-click the part or the Part Studio tab, Export, format STL | What to setUnits: Millimeter. The option exists for STL only, and the help names no default. |
| FreeCAD | Where the unit is setFile > Export, or Meshes > Export mesh in the Mesh Workbench. Its documentation shows no unit option in either, nor in the Mesh Formats preferences | What to setNothing to set. FreeCAD works in millimetres internally and offers no unit on mesh export. |
| Blender | Where the unit is setFile > Export > STL: Scale (default 1.0) and Scene Unit (default off). Scene Properties > Units > Unit Scale | What to setAt Scale 1.0 with Scene Unit off, one Blender unit is written as one STL unit. A part modelled at Unit Scale 1.0 that the interface shows as 120 mm goes out as 0.12. Set Scale to 1000, or model at Unit Scale 0.001 with Scene Unit off; not both. |
| SketchUp | Where the unit is setFile > Export > 3D Model, STL, Options, STL Units | What to setMillimeters. By default the export uses the model's units, set under Window > Model Info > Units. Checked for desktop SketchUp; SketchUp for Web not checked. |
| Tinkercad | Where the unit is setWorkplane settings: Metric (millimetres) or Imperial (inches); Export, For 3D Print, STL | What to setKeep the workplane in millimetres, then check the file. We could not confirm from its help what the STL holds after a switch to inches. |
| OpenSCAD | Where the unit is setNone. The numbers in the script are written as they are | What to setWrite millimetres. cube(10) is a 10-unit cube and arrives as 10 mm in the slicer; there is nothing to set. |
Inventor, Solid Edge and NX also appear in the searches that lead here. We have not read their export dialogs, so they are not in the table. The rule is the same in any program: find the unit in the STL export options, or check the exported file against one known dimension.
What your slicer does with it
Three slicers whose source we read prompt on import by volume, not by length. The thresholds below are from the release versions named; the volume is the mesh volume in file units cubed.
| Slicer and version | Metres | Inches | Centimetres |
|---|---|---|---|
| PrusaSlicer 2.9.6 | MetresVolume under 0.001: asks whether the part is defined in metres and offers to recalculate | InchesVolume under 9: the same question for inches | CentimetresNo check |
| Bambu Studio 02.08.02.61 | MetresVolume under 0.008: asks whether to scale to millimetres; Yes multiplies by 1,000 | InchesVolume under 8: the same dialog; Yes multiplies by 25.4 | CentimetresNo check |
| OrcaSlicer 2.4.2 | MetresAs Bambu Studio | InchesAs Bambu Studio | CentimetresNo check |
Because the test is a volume, the prompts catch small parts only. A solid 120 x 80 x 50 mm block drawn in inches has a volume of about 29 cubic inches, above both inch thresholds, so it loads 25.4 times too small with no question. The same block drawn in metres is 0.00048 cubic metres, under both metres thresholds, so it is caught.
None of the three checks for centimetres. A part drawn in cm with a volume above 8 or 9 loads 10 times too small, silently. Below that, the inch prompt appears, and accepting it makes the part 2.54 times too big. Bambu Studio's 02.08.04.57 beta, published in September 2026, converts without the dialog and only writes a line to its log, so the next release may behave differently from the table.
Fixing the unit is not rescaling the part
A unit fix multiplies by 10, 25.4 or 1,000 and gives back the size the part was drawn at: holes, walls and threads return to their drawn values. Any other factor changes them too. Scale a downloaded part to 120% and its holes, walls and threads grow 20% as well; a hole made for a 6 mm shaft no longer fits one.
We hold ±0.5% of the size, minimum ±0.5 mm. A unit fix keeps the part inside that; a free rescale moves every fit, so check the fits again, or send the part at the drawn size and say which dimension must change. The tolerances guide shows what ±0.5% means at each size.
Sending it
Send STEP or 3MF when you have them; they carry the unit. For an STL or OBJ, three lines in the part description settle the size:
- The unit"Drawn in centimetres" or "drawn in inches" when it is not mm. The form reads STL as mm.
- One known dimensionThe length that matters, in mm. With the file, that settles the size in one look.
- What must stay as drawnA hole, a thread, a mating face. We hold ±0.5% of the size, minimum ±0.5 mm; name anything that needs more.
A person opens it. They check that it prints, that the size is what you meant, and that the material fits the job. STL and OBJ do not store units, so we ask when the size looks off. In our enquiry archive the founder asked about size, scale or units in 14 threads, and once asked back: "Is the size 16x12 cm, or 16x12 mm?" A real dimension written with its unit answers that before it is asked. A model an AI made has its own checklist: Check an AI model.
Questions
Checked by the druckworks workshopUpdated
Do STL files have units?
No. The format has no field for one: a binary STL is a header, a triangle count and twelve numbers per triangle. 3MF stores a unit attribute, millimetre by default, and STEP declares its unit, so both arrive at the size they were drawn at.
What unit does Blender export STL in?
Its own units, unscaled, at the export dialog's defaults of Scale 1.0 and Scene Unit off. A part modelled at Unit Scale 1.0 that the interface shows as 120 mm is written as 0.12, which a slicer reads as 0.12 mm or asks about as metres. Set Scale to 1000 in the export dialog, or model at Unit Scale 0.001.
Why is my Fusion 360 STL 10 times too small?
A factor of 10 means the file is in centimetres, which is Fusion's internal length unit. Open Save As Mesh, set Unit Type to Millimeter and export again. The help names no default for that setting, so check it every time.
Does my slicer fix the units?
PrusaSlicer 2.9.6, Bambu Studio 02.08.02.61 and OrcaSlicer 2.4.2 ask about metres or inches for small parts only, judged by volume, and none of the three checks for centimetres. A solid 120 x 80 x 50 mm block drawn in inches loads 25.4 times too small with no question.
Can you fix the scale for me?
Yes, when you tell us the unit or one real dimension. A unit fix is a known factor; a person applies it and checks the size before any price. STL and OBJ do not store units, so we ask when the size looks off.
Can a downloaded model be scaled up?
Yes, but holes, walls and threads scale with it, and a fit that worked at the original size may not at the new one. We hold ±0.5% of the size, minimum ±0.5 mm. Say which dimension must stay as drawn, and a person checks the rest against it.
Send the file and one real dimension
Drop the STL in the check, pick the unit it was drawn in and send it with the length that matters. A person checks the size before any price and replies in 3 hours on average on workdays.
